Wednesday, December 2, 2009

Interior of 300c

Dimensions Salon 300C allowed Chrysler designers to create a spacious and luxurious interior with lots of amenities. With a wheelbase 3048 mm component, 300C has a maximum length of in-class space to accommodate the feet of the rear passengers (maximum value - 1020 mm) maximum length of the space to accommodate the feet of the front passengers - 1061 mm. Ease of access to the cabin is provided by large doorways (doors open at an angle 72 degrees).
300C outperforms its competitors and the height that allows you to locate the driver's seat above on the road surface, improving visibility. Distance from seat cushions to the ceiling is as follows: front - 975 mm, rear - 959 mm. The driver of any size would be able to easily find the best position of his chair, which has eight different adjustments to the servo. The steering column is also equipped with a servo-controlled adjustments for length and angle. Pedals (accelerator pedal and brake pedal) can also be adjusted with a servo, but this option is set to order. In this case, the range of longitudinal adjustment of the pedals is 76 mm. Built-in memory lets you save settings for two different drivers.
Both front seats have manual lumbar stop. The range of longitudinal adjustment of the driver seat is 270 mm - a 50 mm more than the previous model Chrysler. Rear seats 300C equipped with three headrests and a folding center armrest. The rear seat is on 60/40. It can also be folded completely forward, thus freeing up additional space for cargo.
The luxurious interior with a rich set of additional equipment As befits sedan premium ", 300C has a rich base set. Developers car paid much attention to reducing noise and vibration, including aerodynamic noise due to the motion of the car. The result is a luxurious car that meets the most exacting tastes.
Devices of the front panel dials are colored plaster with black lettering and black as arrows. Highlighting scales performed fluorescent light on a contour dials. After headlamps devices glow green and blue light. The front panel includes: speedometer, tachometer, fuel level indicator and coolant temperature and the central display driver information system (EVIC). Driver Information System is an interactive system, the central display can operate in seven different modes. Scroll keys and function keys of the system are located on the upper spokes of the steering wheel. There also are key audio controls.
The center console lid and automatic transmission selector made of plastic coated "for aluminum. The center console are the nozzle air-conditioning, Analog Clock, stereo system, satellite navigation systems (installed on request) and controls the climate setting. Part of the center console located between the front seats, a box for small items with a rosette of 12 volts. Top box covered with a padded armrest. Not forgotten, and two tip-up cup holder.
Patented laths "under the tortoise shell, similar to those used for decoration spectacles, frame door handles, decorated with the selector lever and the upper part of the ARC steering wheel. These parts form a distinct, unique style. The illusion of "tortoise shell" is created by applying a translucent yellow-gold plastic on an aluminum base, and then applied another layer of dark, spotted polycarbonate gives to products finished appearance.
Chrysler 300C, designed for the European market, has tinted windows that reduce heat transfer, and thick (5 mm) glass front doors to reduce noise in the cabin. Two-band system of climate control is equipped with advanced sensors that allow completely independently regulate the microclimate in the right and left areas of the cabin. The system includes two light sensor located in the upper part of the control panel and can automatically adjust the work of the climate installation, depending on the level of illumination. Participating in the management of climate system is only in the initial installation of the desired parameters. Depending on your settings in the system provides two ranges of fan speed.
The vehicles, intended for sale in Europe, will be installed speaker Boston Acoustics-class "high-end". New audio of this class will already be installed as standard. This system has six speakers and speaker amplifier 288 watts. On the order can be established even more powerful amplifier power 380 W with additional loudspeakers. In both models there is a high-frequency speaker located on the center console, and 8 inch low-frequency speaker in the rear of the car. The antenna for the radio is built into the rear window.
Central locking with remote control enhances the safety car owner Chrysler 300C - opening-closing door locks and the inclusion of outdoor lighting devices can be operated from a distance of 20 meters. From the remote control can also enable and disable the security alarm. Ignition key has a button for opening the trunk. Trunk can be opened and the button on the front panel.

Read More...

Exterior of 300c

Chrysler designers have developed a new approach, which allowed the company to return to the market rear-wheel drive luxury cars. " The long hood and short trunk, lifted the lower limit of glazing with high doors and smaller side windows, together form a distinctive and expressive image of sedan 300 C.
Short front and rear overhangs Chrysler 300 C stress greater wheelbase and large wheels, located as it were, outside the body, create an image of the car, which is the winner in the battle with the road. Body panels are made of conventional and high-strength steel, hood and trunk lid is made of aluminum alloy.
The dominant feature of the design of the Chrysler 300C is the design of the grille. Emphasize high, it smoothly above the contours of the bonnet and front bumper. This design decision - a tribute to cars, Chrysler release late fifties, wearing the same literal notation. Because of this new parts Chrysler 300 C can not be mixed with any other car. For the first time in the development of new products, engineers used a full-size car in the blowing wind tunnel of DaimlerChrysler in Detroit. It was able to optimize not only the general contours of the body, but small parts of the exterior. Were carried out research work on aerodynamics poddnischevoy zone car as has ever been made by engineers Chrysler. Through these activities, air resistance coefficient Cd of the new model is just 0,343.

Read More...

Chrysler 300C. Safety

Chrysler 300C offers both a rich set of passive safety. Three programmed deformation zones dampen the energy of frontal impact into the body. Dual front side members made from two types of high-strength steel, transmit shock loads to cross the front shield, which, in turn, redistributes the efforts on the side and lower bearing elements so as to maintain the Chrysler 300 saloon with the living space. Highly placed the lower boundary of the lateral glazing allowed to make a door, which have the smallest ratio of glass area to their total area compared to most other cars. Structurally, the door consists of two molded panels. This feature of construction, as well as the use of the internal amplifiers and tubular reinforcing beams ensures reliable protection of passengers in the event of a collision.

The electronic control unit airbag system uses four sensors to determine the impact of its intensity and direction. In addition to the adaptive front airbags driver and front passenger next generation car installed side curtain airbags, which are attached to the bearing elements of the roof above the doors. All passengers Chrysler 300 fitted with three point seat belts. Seatbelts driver and front passenger seats are equipped with pretensioners with force limiters tension.

Bearing elements of the rear Chrysler 300 are designed in accordance with the stringent requirements, prescriptive test the central body blow from behind at a speed of 80 km / h. The design of the type "pipe in pipe" provides the body rigidity and a character of deformation upon impact, where the fuel tank is not damaged.

The electronic device can help when reversing. To do this, the rear bumper installed sensors for detecting obstacles. To a driver with the Chrysler 300 - means of sound and light alarm, warning of possible danger. Outside mirrors automatically rotated when you select reverse gears. Frontal Visibility from the driver's seat improved by the installation of two new sensors. Rain sensor will automatically turn the front windshield wiper at the start of rain and light sensor will automatically turn on lights with the onset of darkness.

Read More...

Friday, November 20, 2009

Chrysler and Lancia cars will be developed together

LanciaConcern Fiat, which is co-owner of the American group Chrysler, plans to establish cooperation between brands Lancia and Chrysler. Writes about this publication Automotive News.

It is assumed that these brands will occupy the joint development of new models for the European market. In particular, the Chrysler 300C sedan of the next generation can be built on a common platform with the successor Lancia Thesis, the new Chrysler Sebring will get the chassis of the big sedan "Alfa Romeo (This same platform will be used for a similar model of Lancia), a Lancia Ypsilon hatchback can share its platform with the new compact model Chrysler.

In addition, both brands will now be one-man operation - the current head of Lancia, Olivier Francois, who on Monday was appointed curator of the brand Chrysler. It should be noted that most experts believe Francois "right hand" of the president concern Fiat Sergio Marchione.

Read More...

Saturday, November 14, 2009

Chrysler sells Jeep to concern Renault-Nissan

JeepChrysler began talks with Renault-Nissan concern about the sale of one of the most famous American brands Jeep. According to Reuters, the decision may be taken in connection with the need to restructure Chrysler after receiving a loan of four billion dollars from the U.S. government.

Negotiations began two corporations last year, but now moved to the active phase. In addition, part of its assets Chrysler may sell Canadian manufacturer of components Magna. These include, in particular, about the plant for the production of spare parts in Illinois.

Chrysler - not only an American concern, sell assets. Company General Motors, also on the verge of bankruptcy, announced plans to sell the brand Saab, Saturn, Pontiac and Hummer. However, the Swedish Saab group has a problem - want to buy a stamp is still no.

Read More...

Thursday, November 12, 2009

Chrysler introduced the Model 200C

Chrysler 200CBased in the deepest crisis of Chrysler LLC introduced the Auto Show in Detroit is a very interesting vehicle called the 200C Concept. Some experts say that if Chrysler will be able to put this model on the conveyor, it can become the lifeline to pull Chrysler from financial ruin. The car some Americans really get very interesting.

In terms of size Chrysler 200C Concept will compete with such cars as the BMW 5-Series and Mercedes-Benz E-Class. Although the price it is, of course, would be a completely different niche. But Chrysler is not want to talk about the cost model. Representatives of the company are focused on design and engine. From design, everything is clear, he was successful. And now with regard to the power plant. Under the hood lies 200C hybrid engine, which has a total power of 268 hp In this case the electric motor gives in terms of kilowatt once 74 hp, which allows for low speed does not include a standard engine, which feeds gas ... (one electric 200C can drive about 60 km).

In general, all sounds very interesting. However, while representatives of Chrysler could not say when the 200C will go into mass production. But now we can certainly say - even if the model and stand on the conveyor, then it would be normal under the hood of the motor. And if it is a hybrid, it will eat gasoline. After the U.S. is now virtually non-existent infrastructure of fueling cars with gas.

Read More...

Wednesday, November 11, 2009

Chrysler introduced the Urban Electric Car

Urban Electric CarSeptember 23 the company GEM, a member of the concern Chrysler, introduced four new electric trolley Peapod, which is scheduled for release in 2009. According to the official site of GEM, a car designed for movement in the city.

Novelty is equipped with an electric motor which is powered by six 12-volt batteries, rechargeable from an ordinary wall outlet and under braking. Movement can be carried out in two modes - in the usual, with a maximum speed of 40 kilometers per hour, or economical, with a "maximum speed" 25 kilometers per hour. Cruising range is approximately 50 kilometers, and charge the battery after such a trip would be 6-8 hours.

Inside the car - an unusual central panel with connectors for connecting the iPod and the ability to wireless control communicator iPhone. Seats are covered with a special mesh material produced from environmentally friendly materials, which require further processing.
Company GEM (GreenEcoMobility) was founded in 1998, has since produced about 38,000 electric vehicles. According to Peter Arnella, head of the center of innovation Chrysler, the company goal is to produce environmentally friendly cars that do not use gasoline and not polluting the environment. In the future the company plans to develop a light truck and several city vehicles that run on electricity.

Read More...